The Solbraze Autoflame System allows for easy adjustment of flame heating once the direction and intensity of the flames has been set. Electrical solenoids are used to control the heating cycle and these may be controlled using timers or PLC's. Each batch of work will therefore receive the same amount of heat.

The heart of the Autoflame system is the gas/air mixer unit and with the range of high intensity, ribbon, surface mix and blast burners available a wide variety of soldering and brazing applications can be readily handled by the user. Compressed air is used with many different gases - Natural Gas, Propane, Acetylene etc. and the system can be enriched with oxygen. The Autoflame system gives the freedom to solder or braze using the most adaptable equipment on the market today.

The mixing system can be housed in a floor standing framework with work top fitted with a trolley loading system for batch production. For continuous production the mixing system is used with rotary and indexing tables or conveyors. The solder or brazing alloy is preplaced as rings fed as wire or dispenses as paste - all also available from Solbraze.

Solbraze has a fully equipped laboratory containing its full product range for sample testing and evaluation. Please visit us, or send samples of your products for a free of charge assessment to determine the optimum manufacturing process and equipment requirements.